Bird-technologies 5015 Series-Manual Manual de usuario descargar pdf (Pagina 16)

1. Do one of the following:

z To connect to a Digital Power Meter:

z For Models 5011 and 5011EF:

Connect the Bird TPS to the “Sensor”

serial port on the DPM using the sensor

cable provided.

z For Models 5015 and 5015-EF:

Connect the Bird TPS to the “Sensor” USB

port on the DPM using the sensor cable

provided.

 Note: An attenuator or directional coupler

should be used with the TPS in most applications.

 Note: For an RF source with output between

0.1 and 50 W, use a 40 dB, 50 W attenuator.

z To connect to a PC with VPM2 software (5015

and 5015-EF ONLY):

z Connect the Bird TPS to the a USB port on

the PC using the sensor cable provided.

2. Connect the TPS RF input to the source (using an

attenuator, if appropriate).

 Note: Only connect the TPS directly to a

source if the RF power will be less than 10 mW.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 30 31

Sin comentarios

Bird-technologies 5015 Series-Manual Manual de usuario Pagina 16